Complete Formula Sheets Centre

Explore grade-wise, board-aligned Mathematics, Physics, and Chemistry formulas with exact symbol definitions, SI units, worked examples, common mistakes, and printable layouts.

PhysicsGRADE 10intermediate
CBSE / ICSE / IGCSE / IB / UAE / USA / Singapore / Canada

Spherical Mirror Formula, Curvature & Magnification

Light: Reflection & Refraction
R=2f,1f=1v+1u,m=hiho=−vuR = 2f, \quad \frac{1}{f} = \frac{1}{v} + \frac{1}{u}, \quad m = \frac{h_i}{h_o} = -\frac{v}{u}

Symbol Definitions & SI Units

  • R: Radius of curvature of the spherical mirror
  • f: Focal length (negative for concave, positive for convex)
  • u, v: Object distance and image distance measured from the pole
  • m: Linear magnification (h_i / h_o)

SI Units: f, R, u, v, h_i, h_o: meter (m) or centimeter (cm); m: dimensionless

Worked Example

An object is placed 30 cm in front of a concave mirror of focal length 15 cm (u = -30 cm, f = -15 cm). 1/v = 1/(-15) - 1/(-30) = -1/30, so v = -30 cm and m = -(-30)/(-30) = -1 (real, inverted, same size).

Common Mistake: Forgetting to assign a negative sign to object distance u or concave focal length f.

Revision Tip: Negative m always indicates a real and inverted image; positive m indicates a virtual and erect image.

Open Full Chapter: Light: Reflection & Refraction →Print-Ready Web Sheet (PDF uploaded via Admin)
PhysicsGRADE 10intermediate
CBSE / ICSE / IGCSE / IB / UAE / USA / Singapore / Canada

Snell's Law, Refractive Index & Critical Angle

Light: Reflection & Refraction
sin⁡isin⁡r=n21=v1v2=n2n1,n=cv,sin⁡C=1n\frac{\sin i}{\sin r} = n_{21} = \frac{v_1}{v_2} = \frac{n_2}{n_1}, \quad n = \frac{c}{v}, \quad \sin C = \frac{1}{n}

Symbol Definitions & SI Units

  • i, r: Angles of incidence and refraction measured from the normal
  • n_{21}: Refractive index of medium 2 with respect to medium 1
  • c: Speed of light in vacuum (3 × 10^8 m/s)
  • v: Speed of light in the optical medium
  • C: Critical angle for denser-to-rarer boundary

SI Units: c, v: m/s; n: dimensionless; i, r, C: degrees

Worked Example

If glass has absolute refractive index n = 1.5, the speed of light inside glass is v = c / n = (3 × 10^8) / 1.5 = 2.0 × 10^8 m/s.

Common Mistake: Inverting the velocity ratio (putting v_2 / v_1 instead of v_1 / v_2) or measuring angles from the surface instead of the normal.

Revision Tip: Remember: n_1 sin(i) = n_2 sin(r) never fails regardless of which medium is denser.

Open Full Chapter: Light: Reflection & Refraction →Print-Ready Web Sheet (PDF uploaded via Admin)
PhysicsGRADE 10intermediate
CBSE / ICSE / IGCSE / IB / UAE / USA / Singapore / Canada

Thin Lens Formula, Magnification & Optical Power

Light: Reflection & Refraction
1f=1v−1u,m=hiho=vu,P=1f (in m)=100f (in cm)\frac{1}{f} = \frac{1}{v} - \frac{1}{u}, \quad m = \frac{h_i}{h_o} = \frac{v}{u}, \quad P = \frac{1}{f\text{ (in m)}} = \frac{100}{f\text{ (in cm)}}

Symbol Definitions & SI Units

  • f: Focal length (positive for convex/converging, negative for concave/diverging)
  • u, v: Object and image distances from the optical center
  • P: Optical power of the lens measured in Dioptres (D)

SI Units: P: Dioptre (D = m⁻¹); f: meter (m)

Worked Example

A convex lens has f = +25 cm = +0.25 m. Its power is P = 1 / 0.25 = +4.0 D.

Common Mistake: Using focal length in centimeters directly inside P = 1/f, or using the mirror sign in lens magnification.

Revision Tip: Notice the sign swap from mirrors: lens formula has a minus (1/v - 1/u), while lens magnification has a plus (+v/u).

Open Full Chapter: Light: Reflection & Refraction →Print-Ready Web Sheet (PDF uploaded via Admin)
PhysicsGRADE 10foundation
CBSE / ICSE / IGCSE / IB / UAE / USA / Singapore / Canada

Quantization of Charge, Electric Current & Potential Difference

Electricity & Circuits
Q=n⋅e,I=Qt,V=WQQ = n \cdot e, \quad I = \frac{Q}{t}, \quad V = \frac{W}{Q}

Symbol Definitions & SI Units

  • Q: Total electric charge transferred
  • n: Integer number of electrons
  • e: Elementary charge (1.6 × 10⁻¹⁹ C)
  • I: Electric current (rate of charge flow)
  • V: Potential difference (work done per unit charge)

SI Units: Q: Coulomb (C), I: Ampere (A), V: Volt (V), W: Joule (J), t: second (s)

Worked Example

A current of 0.5 A flows for 2 minutes (120 s). Total charge Q = I × t = 0.5 × 120 = 60 C.

Common Mistake: Leaving time in minutes instead of converting to seconds when calculating Q = I × t.

Revision Tip: 1 C of charge corresponds to 6.25 × 10¹⁸ electrons.

Open Full Chapter: Electricity & Circuits →Print-Ready Web Sheet (PDF uploaded via Admin)
PhysicsGRADE 10foundation
CBSE / ICSE / IGCSE / IB / UAE / USA / Singapore / Canada

Ohm's Law, Resistance, Resistivity & Conductivity

Electricity & Circuits
V=IR,R=ρlA,G=1R,σ=1ρV = I R, \quad R = \rho \frac{l}{A}, \quad G = \frac{1}{R}, \quad \sigma = \frac{1}{\rho}

Symbol Definitions & SI Units

  • V: Potential difference across the conductor
  • I: Electric current through the conductor
  • R: Electrical resistance
  • \rho: Material resistivity (specific resistance)
  • l, A: Conductor length and cross-sectional area
  • G, \sigma: Conductance and electrical conductivity

SI Units: R: Ohm (Ω), ρ: Ω·m, G: Siemens (S), σ: S/m

Worked Example

A wire of resistance 4 Ω is stretched to double its length (so area halves). New resistance R' = ρ(2l)/(A/2) = 4R = 16 Ω.

Common Mistake: Assuming resistivity ρ changes when a wire's length or thickness changes (only R changes; ρ is a material constant).

Revision Tip: If a wire is stretched to n times its original length at constant volume, its resistance becomes n² times the original.

Open Full Chapter: Electricity & Circuits →Print-Ready Web Sheet (PDF uploaded via Admin)
PhysicsGRADE 10foundation
CBSE / ICSE / IGCSE / IB / UAE / USA / Singapore / Canada

Equivalent Resistance in Series & Parallel Circuits

Electricity & Circuits
Rs=R1+R2+⋯+Rn,1Rp=1R1+1R2+⋯+1RnR_s = R_1 + R_2 + \dots + R_n, \quad \frac{1}{R_p} = \frac{1}{R_1} + \frac{1}{R_2} + \dots + \frac{1}{R_n}

Symbol Definitions & SI Units

  • R_s: Total equivalent resistance in a series loop
  • R_p: Total equivalent resistance in a parallel network
  • R_1, \dots, R_n: Individual resistor values

SI Units: Ohm (Ω)

Worked Example

Two resistors of 6 Ω and 3 Ω in parallel give 1/R_p = 1/6 + 1/3 = 3/6 = 1/2, so R_p = 2 Ω.

Common Mistake: Forgetting to take the reciprocal at the end of a parallel resistance calculation.

Revision Tip: For two parallel resistors, use the quick shortcut R_p = (R_1 × R_2) / (R_1 + R_2). The result is always smaller than the smallest resistor.

Open Full Chapter: Electricity & Circuits →Print-Ready Web Sheet (PDF uploaded via Admin)
PhysicsGRADE 10intermediate
CBSE / ICSE / IGCSE / IB / UAE / USA / Singapore / Canada

Electrical Energy, Power & Joule's Law of Heating

Electricity & Circuits
W=H=QV=VIt=I2Rt=V2tR,P=Wt=VI=I2R=V2RW = H = Q V = V I t = I^2 R t = \frac{V^2 t}{R}, \quad P = \frac{W}{t} = V I = I^2 R = \frac{V^2}{R}

Symbol Definitions & SI Units

  • W, H: Electrical energy consumed / thermal energy generated
  • P: Electrical power rating or dissipation rate
  • t: Duration of current flow in seconds

SI Units: W, H: Joule (J) or kWh (1 kWh = 3.6 × 10⁶ J); P: Watt (W)

Worked Example

A 1000 W electric iron runs for 2 hours. Energy consumed = 1 kW × 2 h = 2 kWh = 7.2 × 10⁶ J.

Common Mistake: Forgetting that commercial electricity units (1 unit = 1 kWh) require power in kW and time in hours.

Revision Tip: Use P = I²R when comparing series devices (same current) and P = V²/R when comparing parallel household appliances (same voltage).

Open Full Chapter: Electricity & Circuits →Print-Ready Web Sheet (PDF uploaded via Admin)
ChemistryGRADE 10foundation
CBSE / ICSE / IGCSE / IB / UAE / USA / Singapore / Canada

Combination & Decomposition Reactions (Thermal, Electrolytic, Photolytic)

Chemical Reactions & Equations
Combination: 2Mg+O2→2MgO+HeatThermal: CaCO3→ΔCaO+CO2,2Pb(NO3)2→Δ2PbO+4NO2↑+O2Electrolytic: 2NaCl→Electricity2Na+Cl2,2Al2O3→Electricity4Al+3O2Photolytic: 2AgCl→Sunlight2Ag+Cl2,2AgBr→Sunlight2Ag+Br2\begin{aligned} &\text{Combination: } 2\text{Mg} + \text{O}_2 \rightarrow 2\text{MgO} + \text{Heat} \\ &\text{Thermal: } \text{CaCO}_3 \xrightarrow{\Delta} \text{CaO} + \text{CO}_2, \quad 2\text{Pb(NO}_3)_2 \xrightarrow{\Delta} 2\text{PbO} + 4\text{NO}_2\uparrow + \text{O}_2 \\ &\text{Electrolytic: } 2\text{NaCl} \xrightarrow{\text{Electricity}} 2\text{Na} + \text{Cl}_2, \quad 2\text{Al}_2\text{O}_3 \xrightarrow{\text{Electricity}} 4\text{Al} + 3\text{O}_2 \\ &\text{Photolytic: } 2\text{AgCl} \xrightarrow{\text{Sunlight}} 2\text{Ag} + \text{Cl}_2, \quad 2\text{AgBr} \xrightarrow{\text{Sunlight}} 2\text{Ag} + \text{Br}_2 \end{aligned}

Symbol Definitions & SI Units

  • \Delta: Thermal energy (heating) supplied
  • \uparrow: Gas evolved during the reaction

Worked Example

Heating white lead(II) nitrate crystals produces yellow PbO residue, brown NO₂ fumes, and oxygen gas.

Common Mistake: Writing unbalanced equations for lead nitrate decomposition or confusing AgCl (white to grey) with AgBr (pale yellow to grey).

Revision Tip: Silver halide photolysis (AgCl / AgBr) is the classic board question linked to black-and-white photography.

Open Full Chapter: Chemical Reactions & Equations →Print-Ready Web Sheet (PDF uploaded via Admin)
ChemistryGRADE 10intermediate
CBSE / ICSE / IGCSE / IB / UAE / USA / Singapore / Canada

Displacement, Precipitation, Redox & Corrosion Equations

Chemical Reactions & Equations
Displacement: Fe(s)+CuSO4(aq)→FeSO4(aq)+Cu(s)Precipitation: BaCl2(aq)+Na2SO4(aq)→BaSO4(s)↓+2NaCl(aq)Redox: CuO(s)+H2(g)→ΔCu(s)+H2O(g)Corrosion: 2Fe+32O2+xH2O→Fe2O3⋅xH2O\begin{aligned} &\text{Displacement: } \text{Fe}(s) + \text{CuSO}_4(aq) \rightarrow \text{FeSO}_4(aq) + \text{Cu}(s) \\ &\text{Precipitation: } \text{BaCl}_2(aq) + \text{Na}_2\text{SO}_4(aq) \rightarrow \text{BaSO}_4(s)\downarrow + 2\text{NaCl}(aq) \\ &\text{Redox: } \text{CuO}(s) + \text{H}_2(g) \xrightarrow{\Delta} \text{Cu}(s) + \text{H}_2\text{O}(g) \\ &\text{Corrosion: } 2\text{Fe} + \frac{3}{2}\text{O}_2 + x\text{H}_2\text{O} \rightarrow \text{Fe}_2\text{O}_3\cdot x\text{H}_2\text{O} \end{aligned}

Symbol Definitions & SI Units

  • \downarrow: Insoluble solid precipitate formed
  • (aq): Aqueous solution dissolved in water

Worked Example

In CuO + H₂ → Cu + H₂O, CuO is reduced (oxidizing agent) and H₂ is oxidized (reducing agent).

Common Mistake: Swapping oxidizing agent and reducing agent: the substance that gets reduced is the oxidizing agent.

Revision Tip: Always memorize precipitate colors: BaSO₄ (white), AgCl (white), Cu(s) deposit (reddish-brown), FeSO₄ solution (pale green).

Open Full Chapter: Chemical Reactions & Equations →Print-Ready Web Sheet (PDF uploaded via Admin)
ChemistryGRADE 10foundation
CBSE / ICSE / IGCSE / IB / UAE / USA / Singapore / Canada

Acid–Base Reactions, Neutralization & pH Relations

Acids, Bases & Salts
pH=−log⁡[H+],pOH=−log⁡[OH−],pH+pOH=14 (at 25∘C)Acid + Carbonate: CaCO3+2HCl→CaCl2+H2O+CO2↑Neutralization: HCl+NaOH→NaCl+H2OBase + Metal: Zn+2NaOH→Na2ZnO2+H2↑\begin{aligned} &\text{pH} = -\log[\text{H}^+], \quad \text{pOH} = -\log[\text{OH}^-], \quad \text{pH} + \text{pOH} = 14\text{ (at }25^\circ\text{C)} \\ &\text{Acid + Carbonate: } \text{CaCO}_3 + 2\text{HCl} \rightarrow \text{CaCl}_2 + \text{H}_2\text{O} + \text{CO}_2\uparrow \\ &\text{Neutralization: } \text{HCl} + \text{NaOH} \rightarrow \text{NaCl} + \text{H}_2\text{O} \\ &\text{Base + Metal: } \text{Zn} + 2\text{NaOH} \rightarrow \text{Na}_2\text{ZnO}_2 + \text{H}_2\uparrow \end{aligned}

Symbol Definitions & SI Units

  • [\text{H}^+]: Molar concentration of hydrogen/hydronium ions
  • \text{Na}_2\text{ZnO}_2: Sodium zincate salt

Worked Example

A solution with [H⁺] = 10⁻³ M has pH = -log(10⁻³) = 3 (acidic) and pOH = 14 - 3 = 11.

Common Mistake: Assuming all metals react with bases—only amphoteric metals like Zn and Al form soluble zincates/aluminates with NaOH.

Revision Tip: Acid + Metal Oxide and Base + Non-Metal Oxide both behave like neutralization reactions producing salt + water.

Open Full Chapter: Acids, Bases & Salts →Print-Ready Web Sheet (PDF uploaded via Admin)
ChemistryGRADE 10intermediate
CBSE / ICSE / IGCSE / IB / UAE / USA / Singapore / Canada

Industrial Salts: NaOH, Baking Soda, Washing Soda, Bleaching Powder & POP

Acids, Bases & Salts
Chlor-Alkali: 2NaCl(aq)+2H2O(l)→Electricity2NaOH+Cl2↑+H2↑Baking Soda: NaCl+H2O+CO2+NH3→NH4Cl+NaHCO3Washing Soda: 2NaHCO3→ΔNa2CO3+H2O+CO2,Na2CO3+10H2O→Na2CO3⋅10H2OBleaching Powder: Ca(OH)2+Cl2→CaOCl2+H2OPlaster of Paris: CaSO4⋅2H2O→373 KCaSO4⋅12H2O+32H2O\begin{aligned} &\text{Chlor-Alkali: } 2\text{NaCl}(aq) + 2\text{H}_2\text{O}(l) \xrightarrow{\text{Electricity}} 2\text{NaOH} + \text{Cl}_2\uparrow + \text{H}_2\uparrow \\ &\text{Baking Soda: } \text{NaCl} + \text{H}_2\text{O} + \text{CO}_2 + \text{NH}_3 \rightarrow \text{NH}_4\text{Cl} + \text{NaHCO}_3 \\ &\text{Washing Soda: } 2\text{NaHCO}_3 \xrightarrow{\Delta} \text{Na}_2\text{CO}_3 + \text{H}_2\text{O} + \text{CO}_2, \quad \text{Na}_2\text{CO}_3 + 10\text{H}_2\text{O} \rightarrow \text{Na}_2\text{CO}_3\cdot 10\text{H}_2\text{O} \\ &\text{Bleaching Powder: } \text{Ca(OH)}_2 + \text{Cl}_2 \rightarrow \text{CaOCl}_2 + \text{H}_2\text{O} \\ &\text{Plaster of Paris: } \text{CaSO}_4\cdot 2\text{H}_2\text{O} \xrightarrow{373\text{ K}} \text{CaSO}_4\cdot\frac{1}{2}\text{H}_2\text{O} + \frac{3}{2}\text{H}_2\text{O} \end{aligned}

Symbol Definitions & SI Units

  • \text{CaOCl}_2: Calcium oxychloride (bleaching powder)
  • \text{CaSO}_4\cdot\frac{1}{2}\text{H}_2\text{O}: Calcium sulphate hemihydrate (Plaster of Paris)

Worked Example

Mixing POP with water reverses the dehydration to form a hard crystalline mass of gypsum: CaSO₄·½H₂O + 1½H₂O → CaSO₄·2H₂O.

Common Mistake: Writing 100 K instead of 373 K (100 °C) for gypsum dehydration, or forgetting the 10 water molecules of crystallization in washing soda.

Revision Tip: In Chlor-Alkali electrolysis: Cl₂ is liberated at the Anode, H₂ at the Cathode, and NaOH forms near the cathode.

Open Full Chapter: Acids, Bases & Salts →Print-Ready Web Sheet (PDF uploaded via Admin)
ChemistryGRADE 10intermediate
CBSE / ICSE / IGCSE / IB / UAE / USA / Singapore / Canada

Amphoteric Oxides, Steam Reactions, Calcination, Roasting & Thermite

Metals & Non-Metals
Amphoteric: Al2O3+6HCl→2AlCl3+3H2O,Al2O3+2NaOH→2NaAlO2+H2OSteam: 3Fe(s)+4H2O(g)→Fe3O4(s)+4H2(g)Calcination: ZnCO3→ΔZnO+CO2,Roasting: 2ZnS+3O2→Δ2ZnO+2SO2Thermite: Fe2O3(s)+2Al(s)→2Fe(l)+Al2O3(s)+Heat\begin{aligned} &\text{Amphoteric: } \text{Al}_2\text{O}_3 + 6\text{HCl} \rightarrow 2\text{AlCl}_3 + 3\text{H}_2\text{O}, \quad \text{Al}_2\text{O}_3 + 2\text{NaOH} \rightarrow 2\text{NaAlO}_2 + \text{H}_2\text{O} \\ &\text{Steam: } 3\text{Fe}(s) + 4\text{H}_2\text{O}(g) \rightarrow \text{Fe}_3\text{O}_4(s) + 4\text{H}_2(g) \\ &\text{Calcination: } \text{ZnCO}_3 \xrightarrow{\Delta} \text{ZnO} + \text{CO}_2, \quad \text{Roasting: } 2\text{ZnS} + 3\text{O}_2 \xrightarrow{\Delta} 2\text{ZnO} + 2\text{SO}_2 \\ &\text{Thermite: } \text{Fe}_2\text{O}_3(s) + 2\text{Al}(s) \rightarrow 2\text{Fe}(l) + \text{Al}_2\text{O}_3(s) + \text{Heat} \end{aligned}

Symbol Definitions & SI Units

  • \text{NaAlO}_2: Sodium aluminate
  • \text{Fe}_3\text{O}_4: Iron(II, III) oxide formed with steam

Worked Example

Only Mg and Mn liberate H₂ gas with very dilute HNO₃: Mg + 2HNO₃ → Mg(NO₃)₂ + H₂.

Common Mistake: Mixing up Calcination (Carbonates, CO₂ released) and Roasting (Sulphides, SO₂ released).

Revision Tip: Mnemonic: C for Calcination = Carbonates (limited air); R for Roasting = sulphides with excess O₂.

Open Full Chapter: Metals & Non-Metals →Print-Ready Web Sheet (PDF uploaded via Admin)
ChemistryGRADE 10intermediate
CBSE / ICSE / IGCSE / IB / UAE / USA / Singapore / Canada

Carbon Compounds: Hydrogenation, Oxidation, Dehydration, Esterification & Saponification

Carbon & Its Compounds
Hydrogenation: CH2=CH2+H2→Ni, 573 KCH3−CH3Oxidation: CH3CH2OH→Alk. KMnO4+ΔCH3COOHDehydration: CH3CH2OH→Conc. H2SO4, 443 KCH2=CH2+H2OEsterification: CH3COOH+C2H5OH→Conc. H2SO4CH3COOC2H5+H2OSaponification: CH3COOC2H5+NaOH→CH3COONa+C2H5OH\begin{aligned} &\text{Hydrogenation: } \text{CH}_2=\text{CH}_2 + \text{H}_2 \xrightarrow{\text{Ni},\ 573\text{ K}} \text{CH}_3-\text{CH}_3 \\ &\text{Oxidation: } \text{CH}_3\text{CH}_2\text{OH} \xrightarrow{\text{Alk. KMnO}_4 + \Delta} \text{CH}_3\text{COOH} \\ &\text{Dehydration: } \text{CH}_3\text{CH}_2\text{OH} \xrightarrow{\text{Conc. H}_2\text{SO}_4,\ 443\text{ K}} \text{CH}_2=\text{CH}_2 + \text{H}_2\text{O} \\ &\text{Esterification: } \text{CH}_3\text{COOH} + \text{C}_2\text{H}_5\text{OH} \xrightarrow{\text{Conc. H}_2\text{SO}_4} \text{CH}_3\text{COOC}_2\text{H}_5 + \text{H}_2\text{O} \\ &\text{Saponification: } \text{CH}_3\text{COOC}_2\text{H}_5 + \text{NaOH} \rightarrow \text{CH}_3\text{COONa} + \text{C}_2\text{H}_5\text{OH} \end{aligned}

Symbol Definitions & SI Units

  • \text{Ni}: Nickel catalyst used in addition/hydrogenation
  • \text{CH}_3\text{COOC}_2\text{H}_5: Ethyl ethanoate (sweet-smelling ester)

Worked Example

Heating ethanol with concentrated H₂SO₄ at 443 K removes a water molecule (dehydration) to yield ethene gas.

Common Mistake: Forgetting the dehydrating agent (conc. H₂SO₄) in esterification and ethanol dehydration.

Revision Tip: Esterification makes an ester (acid + alcohol); Saponification breaks an ester with NaOH to make soap salt + alcohol.

Open Full Chapter: Carbon & Its Compounds →Print-Ready Web Sheet (PDF uploaded via Admin)
BiologyGRADE 10foundation
CBSE / ICSE / IGCSE / IB / UAE / USA / Singapore / Canada

Photosynthesis & Three Pathways of Glucose Breakdown

Life Processes
Photosynthesis: 6CO2+6H2O→Sunlight, ChlorophyllC6H12O6+6O2Step 1 (Cytoplasm): Glucose (6C)→Pyruvate (3C)+EnergyAerobic (Mitochondria): Pyruvate→+O26CO2+6H2O+High ATPAnaerobic (Yeast): Pyruvate→No O2Ethanol (2C)+CO2+Low ATPAnaerobic (Muscles): Pyruvate→Lack of O2Lactic Acid (3C)+Low ATP\begin{aligned} &\text{Photosynthesis: } 6\text{CO}_2 + 6\text{H}_2\text{O} \xrightarrow{\text{Sunlight, Chlorophyll}} \text{C}_6\text{H}_{12}\text{O}_6 + 6\text{O}_2 \\ &\text{Step 1 (Cytoplasm): } \text{Glucose (6C)} \rightarrow \text{Pyruvate (3C)} + \text{Energy} \\ &\text{Aerobic (Mitochondria): } \text{Pyruvate} \xrightarrow{+\text{O}_2} 6\text{CO}_2 + 6\text{H}_2\text{O} + \text{High ATP} \\ &\text{Anaerobic (Yeast): } \text{Pyruvate} \xrightarrow{\text{No O}_2} \text{Ethanol (2C)} + \text{CO}_2 + \text{Low ATP} \\ &\text{Anaerobic (Muscles): } \text{Pyruvate} \xrightarrow{\text{Lack of O}_2} \text{Lactic Acid (3C)} + \text{Low ATP} \end{aligned}

Symbol Definitions & SI Units

  • \text{C}_6\text{H}_{12}\text{O}_6: Glucose (6-carbon sugar)
  • \text{ATP}: Adenosine Triphosphate (cellular energy currency)

Worked Example

During intense sprinting, oxygen deficit in human muscle fibers converts pyruvate into lactic acid, causing temporary muscle cramps.

Common Mistake: Writing CO₂ as a byproduct of human muscle anaerobic respiration (only lactic acid is formed; CO₂ is released in yeast fermentation).

Revision Tip: Digestion monomers: Carbohydrates → Glucose, Proteins → Amino acids, Lipids → Fatty acids + Glycerol. Normal human BP = 120/80 mmHg (systolic/diastolic).

Open Full Chapter: Life Processes →Print-Ready Web Sheet (PDF uploaded via Admin)
BiologyGRADE 10foundation
CBSE / ICSE / IGCSE / IB / UAE / USA / Singapore / Canada

PNS Nerve Counts, Plant Hormones & Blood Glucose Homeostasis

Control & Coordination
PNS=12 pairs Cranial+31 pairs Spinal Nerves,Blood Glucose Set Point≈90 mg/100 mL\text{PNS} = 12\text{ pairs Cranial} + 31\text{ pairs Spinal Nerves}, \quad \text{Blood Glucose Set Point} \approx 90\text{ mg/100 mL}

Symbol Definitions & SI Units

  • \text{Insulin}: Secreted by pancreatic beta cells to lower blood glucose into liver glycogen
  • \text{Glucagon}: Secreted by pancreatic alpha cells to raise blood glucose from glycogen
  • \text{TRH / TSH}: Hypothalamus–pituitary negative feedback loop regulating thyroxine (T₃, T₄)

Worked Example

When sunlight strikes one side of a shoot, auxin migrates to the shady side, accelerating cell elongation there and bending the stem toward light (positive phototropism).

Common Mistake: Classifying Abscisic Acid as a growth promoter—it is the primary stress/wilting growth inhibitor.

Revision Tip: Reflex arc path: Receptor → Sensory Neuron → Relay Neuron (Spinal Cord) → Motor Neuron → Effector Muscle.

Open Full Chapter: Control & Coordination →Print-Ready Web Sheet (PDF uploaded via Admin)
BiologyGRADE 10foundation
CBSE / ICSE / IGCSE / IB / UAE / USA / Singapore / Canada

Double Fertilization in Angiosperms (Syngamy + Triple Fusion)

How Do Organisms Reproduce
Syngamy: 1st Male Gamete (n)+Egg Cell (n)→Zygote (2n)Triple Fusion: 2nd Male Gamete (n)+2 Polar Nuclei (n+n)→Endosperm (3n)\begin{aligned} &\text{Syngamy: } 1^{\text{st}}\text{ Male Gamete }(n) + \text{Egg Cell }(n) \rightarrow \text{Zygote }(2n) \\ &\text{Triple Fusion: } 2^{\text{nd}}\text{ Male Gamete }(n) + 2\text{ Polar Nuclei }(n+n) \rightarrow \text{Endosperm }(3n) \end{aligned}

Symbol Definitions & SI Units

  • n: Haploid chromosome set
  • 2n: Diploid zygote developing into the embryo
  • 3n: Triploid endosperm tissue nourishing the embryo

Worked Example

In a germinating seed, the plumule develops into the future shoot and the radicle develops into the future root.

Common Mistake: Confusing ovary (becomes fruit) with ovule (becomes seed).

Revision Tip: Remember: Double Fertilization = Syngamy (2n) + Triple Fusion (3n).

Open Full Chapter: How Do Organisms Reproduce →Print-Ready Web Sheet (PDF uploaded via Admin)
BiologyGRADE 10foundation
CBSE / ICSE / IGCSE / IB / UAE / USA / Singapore / Canada

Mendelian F₂ Cross Ratios & Human Chromosomal Sex Determination

Heredity & Genetics
Monohybrid F2:Phenotypic=3:1,Genotypic=1:2:1 (TT:Tt:tt)Dihybrid F2:Phenotypic=9:3:3:1,Genotypic=1:2:1:2:4:2:1:2:1Human Sex: (44+XX)×(44+XY)→50% Female (XX):50% Male (XY)\begin{aligned} &\text{Monohybrid } F_2: \quad \text{Phenotypic} = 3:1, \quad \text{Genotypic} = 1:2:1\ (\text{TT}:\text{Tt}:\text{tt}) \\ &\text{Dihybrid } F_2: \quad \text{Phenotypic} = 9:3:3:1, \quad \text{Genotypic} = 1:2:1:2:4:2:1:2:1 \\ &\text{Human Sex: } (44 + \text{XX}) \times (44 + \text{XY}) \rightarrow 50\%\text{ Female (XX)} : 50\%\text{ Male (XY)} \end{aligned}

Symbol Definitions & SI Units

  • F_1, F_2: First and second filial generations
  • \text{XX, XY}: Human sex chromosome pairs

Worked Example

Crossing two heterozygous tall pea plants (Tt × Tt) yields 1 TT : 2 Tt : 1 tt (75% tall, 25% dwarf).

Common Mistake: Writing 3:1 as the genotypic ratio instead of the phenotypic ratio.

Revision Tip: In a 16-box dihybrid Punnett square, the 9:3:3:1 counts always sum to 16.

Open Full Chapter: Heredity & Genetics →Print-Ready Web Sheet (PDF uploaded via Admin)
BiologyGRADE 10foundation
CBSE / ICSE / IGCSE / IB / UAE / USA / Singapore / Canada

10% Energy Transfer Law & Stratospheric Ozone Dynamics

Our Environment
En+1=0.10×En,O2→UVO+O,O+O2⇌O3E_{n+1} = 0.10 \times E_n, \quad \text{O}_2 \xrightarrow{\text{UV}} \text{O} + \text{O}, \quad \text{O} + \text{O}_2 \rightleftharpoons \text{O}_3

Symbol Definitions & SI Units

  • E_n: Available energy at trophic level n
  • \text{O}_3: Stratospheric ozone shielding Earth from UV radiation

Worked Example

If producers hold 10,000 J of energy, primary consumers receive 1,000 J, secondary consumers 100 J, and tertiary consumers 10 J.

Common Mistake: Applying the 10% rule from the Sun to plants—plants only capture ~1% of solar energy.

Revision Tip: Food chains rarely exceed 4–5 trophic levels because usable energy drops by a factor of 10 at every step.

Open Full Chapter: Our Environment →Print-Ready Web Sheet (PDF uploaded via Admin)
MathematicsGRADE 10foundation
CBSE / ICSE / IGCSE / IB / UAE / USA / Singapore / Canada

HCF–LCM Product Relation & Quadratic Polynomial Zeroes

Real Numbers & Polynomials
HCF(a,b)×LCM(a,b)=a×b,α+β=−ba,αβ=ca,p(x)=k{x2−(α+β)x+αβ}\text{HCF}(a,b) \times \text{LCM}(a,b) = a \times b, \quad \alpha + \beta = -\frac{b}{a}, \quad \alpha\beta = \frac{c}{a}, \quad p(x) = k\{x^2 - (\alpha + \beta)x + \alpha\beta\}

Symbol Definitions & SI Units

  • a, b: Two positive integers (or leading/linear coefficients in ax² + bx + c)
  • \alpha, \beta: Zeroes of the quadratic polynomial p(x) = ax² + bx + c
  • k: Any non-zero real scaling constant

Worked Example

If zeroes are 3 and -2, then α + β = 1 and αβ = -6, giving p(x) = x² - x - 6.

Common Mistake: Applying HCF × LCM = a × b × c to three numbers (it only holds for two positive integers).

Revision Tip: Watch the minus sign in α + β = -b/a and in x² - (sum)x + (product).

Open Full Chapter: Real Numbers & Polynomials →Print-Ready Web Sheet (PDF uploaded via Admin)
MathematicsGRADE 10foundation
CBSE / ICSE / IGCSE / IB / UAE / USA / Singapore / Canada

Consistency & Solution Conditions for Linear Systems

Pair of Linear Equations in Two Variables
a1a2≠b1b2⇒Intersecting (Unique Solution)a1a2=b1b2=c1c2⇒Coincident (Infinitely Many)a1a2=b1b2≠c1c2⇒Parallel (No Solution / Inconsistent)\begin{aligned} &\frac{a_1}{a_2} \neq \frac{b_1}{b_2} \Rightarrow \text{Intersecting (Unique Solution)} \\ &\frac{a_1}{a_2} = \frac{b_1}{b_2} = \frac{c_1}{c_2} \Rightarrow \text{Coincident (Infinitely Many)} \\ &\frac{a_1}{a_2} = \frac{b_1}{b_2} \neq \frac{c_1}{c_2} \Rightarrow \text{Parallel (No Solution / Inconsistent)} \end{aligned}

Symbol Definitions & SI Units

  • a_1, b_1, c_1: Coefficients of a₁x + b₁y + c₁ = 0
  • a_2, b_2, c_2: Coefficients of a₂x + b₂y + c₂ = 0

Worked Example

For 2x + 3y - 5 = 0 and 4x + 6y - 7 = 0, a₁/a₂ = 1/2 = b₁/b₂ ≠ 5/7, so the lines are parallel with no solution.

Common Mistake: Comparing c₁ and c₂ when one constant is on the left side and the other is on the right side of the equals sign.

Revision Tip: Always rewrite both equations in standard form ax + by + c = 0 before taking ratios.

Open Full Chapter: Pair of Linear Equations in Two Variables →Print-Ready Web Sheet (PDF uploaded via Admin)
MathematicsGRADE 10intermediate
CBSE / ICSE / IGCSE / IB / UAE / USA / Singapore / Canada

Quadratic Formula & Discriminant

Quadratic Equations
x=−b±b2−4ac2a,D=b2−4acx = \frac{-b \pm \sqrt{b^2 - 4ac}}{2a}, \quad D = b^2 - 4ac

Symbol Definitions & SI Units

  • a, b, c: Real coefficients of ax² + bx + c = 0 with a ≠ 0
  • D: Discriminant determining the nature of roots
  • x: Roots (solutions) of the quadratic equation

Worked Example

Solve 2x² - 5x + 2 = 0: Here a = 2, b = -5, c = 2. D = (-5)² - 4(2)(2) = 9. Thus x = (5 ± 3)/4 → x = 2 or x = 1/2.

Common Mistake: Forgetting the negative sign in -b when b is already negative, or dividing only the radical by 2a instead of the entire numerator.

Revision Tip: Always compute D = b² - 4ac first to check whether real roots exist before simplifying.

Open Full Chapter: Quadratic Equations →Print-Ready Web Sheet (PDF uploaded via Admin)
MathematicsGRADE 10foundation
CBSE / ICSE / IGCSE / IB / UAE / USA / Singapore / Canada

Arithmetic Progression: General Term & Sum of n Terms

Arithmetic Progressions (AP)
an=a+(n−1)d,an(from end)=l−(n−1)d,Sn=n2[2a+(n−1)d]=n2(a+l),an=Sn−Sn−1a_n = a + (n - 1)d, \quad a_n^{\text{(from end)}} = l - (n - 1)d, \quad S_n = \frac{n}{2}[2a + (n - 1)d] = \frac{n}{2}(a + l), \quad a_n = S_n - S_{n-1}

Symbol Definitions & SI Units

  • a: First term of the AP
  • d: Common difference (a₂ - a₁)
  • n: Number of terms
  • l: Last term of a finite AP

Worked Example

For AP 3, 7, 11, ... (a = 3, d = 4), the 10th term is a₁₀ = 3 + 9(4) = 39, and S₁₀ = (10/2)(3 + 39) = 210.

Common Mistake: Using n instead of (n - 1) in the nth term formula, or miscalculating d when the sequence is decreasing.

Revision Tip: When three terms are in AP and their sum is given, choose them as (a - d), a, (a + d) so d cancels immediately.

Open Full Chapter: Arithmetic Progressions (AP) →Print-Ready Web Sheet (PDF uploaded via Admin)
MathematicsGRADE 10intermediate
CBSE / ICSE / IGCSE / IB / UAE / USA / Singapore / Canada

Basic Proportionality Theorem (Thales) & Similarity Criteria

Triangles
DE∥BC  ⟺  ADDB=AEEC,Similarity Criteria: AAA (AA), SSS, SASDE \parallel BC \iff \frac{AD}{DB} = \frac{AE}{EC}, \quad \text{Similarity Criteria: AAA (AA), SSS, SAS}

Symbol Definitions & SI Units

  • DE \parallel BC: Line segment drawn parallel to one side of ΔABC
  • AD, DB, AE, EC: Proportional segments on the other two sides

Worked Example

In ΔABC with DE ∥ BC, if AD = 2 cm, DB = 6 cm, and AE = 3 cm, then 2/6 = 3/EC → EC = 9 cm.

Common Mistake: Mismatching vertex order when writing similarity ratios (ΔABC ~ ΔDEF requires AB/DE = BC/EF = AC/DF).

Revision Tip: Always double-check whether a problem gives the full side AB or the lower segment DB before applying BPT.

Open Full Chapter: Triangles →Print-Ready Web Sheet (PDF uploaded via Admin)
MathematicsGRADE 10foundation
CBSE / ICSE / IGCSE / IB / UAE / USA / Singapore / Canada

Distance, Section & Midpoint Formulas

Coordinate Geometry
d=(x2−x1)2+(y2−y1)2,P(x,y)=(m1x2+m2x1m1+m2,m1y2+m2y1m1+m2),M=(x1+x22,y1+y22)d = \sqrt{(x_2 - x_1)^2 + (y_2 - y_1)^2}, \quad P(x,y) = \left(\frac{m_1x_2 + m_2x_1}{m_1 + m_2}, \frac{m_1y_2 + m_2y_1}{m_1 + m_2}\right), \quad M = \left(\frac{x_1 + x_2}{2}, \frac{y_1 + y_2}{2}\right)

Symbol Definitions & SI Units

  • (x_1, y_1), (x_2, y_2): Cartesian coordinates of endpoints A and B
  • m_1 : m_2: Internal division ratio of segment AB

Worked Example

Midpoint of A(2, 6) and B(8, -2) is ((2+8)/2, (6-2)/2) = (5, 2).

Common Mistake: Pairing m₁ with x₁ instead of cross-multiplying m₁ with x₂ and m₂ with x₁.

Revision Tip: When asked to find an unknown ratio, assume the ratio is k : 1 to reduce two unknowns to one.

Open Full Chapter: Coordinate Geometry →Print-Ready Web Sheet (PDF uploaded via Admin)
MathematicsGRADE 10intermediate
CBSE / ICSE / IGCSE / IB / UAE / USA / Singapore / Canada

Trigonometric Ratios & Fundamental Identities

Introduction to Trigonometry
sin⁡θ=PH,cos⁡θ=BH,tan⁡θ=PB=sin⁡θcos⁡θ,sin⁡2θ+cos⁡2θ=1,1+tan⁡2θ=sec⁡2θ,1+cot⁡2θ=csc⁡2θ\sin\theta = \frac{P}{H}, \quad \cos\theta = \frac{B}{H}, \quad \tan\theta = \frac{P}{B} = \frac{\sin\theta}{\cos\theta}, \quad \sin^2\theta + \cos^2\theta = 1, \quad 1 + \tan^2\theta = \sec^2\theta, \quad 1 + \cot^2\theta = \csc^2\theta

Symbol Definitions & SI Units

  • \theta: Acute reference angle in a right triangle
  • P, B, H: Perpendicular (opposite), Base (adjacent), and Hypotenuse

Worked Example

If sin θ = 3/5 (acute), then cos θ = √(1 - 9/25) = 4/5 and tan θ = (3/5)/(4/5) = 3/4.

Common Mistake: Writing sin²θ as sin(θ²), or mixing up opposite and adjacent sides when the reference angle shifts.

Revision Tip: Standard sine values for 0°, 30°, 45°, 60°, 90° follow √0/2, √1/2, √2/2, √3/2, √4/2; reverse the order for cosine.

Open Full Chapter: Introduction to Trigonometry →Print-Ready Web Sheet (PDF uploaded via Admin)
MathematicsGRADE 10foundation
CBSE / ICSE / IGCSE / IB / UAE / USA / Singapore / Canada

Tangent–Radius Perpendicularity & External Tangent Equality

Circles
OP⊥AB (at point of contact P),PQ=PR (tangents from external point P)OP \perp AB\text{ (at point of contact } P\text{)}, \quad PQ = PR\text{ (tangents from external point } P\text{)}

Symbol Definitions & SI Units

  • OP: Radius drawn to the point of tangency P
  • PQ, PR: Tangent segments drawn from an external point P to the circle

Worked Example

If an external point P is 13 cm from center O of a circle with radius 5 cm, tangent length PQ = √(13² - 5²) = 12 cm.

Common Mistake: Assuming the angle between two external tangents equals the central angle—they are supplementary (sum to 180°).

Revision Tip: Recall: angle at the center is twice the angle on the circumference, and angles in the same segment are equal.

Open Full Chapter: Circles →Print-Ready Web Sheet (PDF uploaded via Admin)
MathematicsGRADE 10intermediate
CBSE / ICSE / IGCSE / IB / UAE / USA / Singapore / Canada

Circumference, Arc Length, Sector Area & Segment Area

Areas Related to Circles
C=2πr,A=πr2,larc=θ360∘⋅2πr,Asector=θ360∘πr2,Asegment=θ360∘πr2−12r2sin⁡θC = 2\pi r, \quad A = \pi r^2, \quad l_{\text{arc}} = \frac{\theta}{360^\circ} \cdot 2\pi r, \quad A_{\text{sector}} = \frac{\theta}{360^\circ}\pi r^2, \quad A_{\text{segment}} = \frac{\theta}{360^\circ}\pi r^2 - \frac{1}{2}r^2\sin\theta

Symbol Definitions & SI Units

  • r: Radius of the circle
  • \theta: Central angle of the sector in degrees

Worked Example

For r = 7 cm and θ = 60° (π = 22/7), sector area = (60/360) × (22/7) × 49 = 77/3 ≈ 25.67 cm².

Common Mistake: Forgetting to add 2r when finding the perimeter of a semicircle (πr + 2r) or a sector (l_arc + 2r).

Revision Tip: Major sector area = πr² - Minor sector area; Major segment area = πr² - Minor segment area.

Open Full Chapter: Areas Related to Circles →Print-Ready Web Sheet (PDF uploaded via Admin)
MathematicsGRADE 10intermediate
CBSE / ICSE / IGCSE / IB / UAE / USA / Singapore / Canada

Surface Areas & Volumes of 3D Solids (Cylinder, Cone, Sphere, Cube, Cuboid)

Surface Areas & Volumes
Cube: TSA=6a2, V=a3∣Cuboid: TSA=2(lb+bh+lh), V=lbhCylinder: CSA=2πrh, TSA=2πr(h+r), V=πr2hCone (l=r2+h2):CSA=πrl, TSA=πr(r+l), V=13πr2hSphere: SA=4πr2, V=43πr3∣Hemisphere: CSA=2πr2, TSA=3πr2, V=23πr3\begin{aligned} &\text{Cube: } \text{TSA} = 6a^2,\ V = a^3 \quad | \quad \text{Cuboid: } \text{TSA} = 2(lb + bh + lh),\ V = lbh \\ &\text{Cylinder: } \text{CSA} = 2\pi rh,\ \text{TSA} = 2\pi r(h+r),\ V = \pi r^2 h \\ &\text{Cone } (l = \sqrt{r^2 + h^2}): \text{CSA} = \pi rl,\ \text{TSA} = \pi r(r+l),\ V = \frac{1}{3}\pi r^2 h \\ &\text{Sphere: } \text{SA} = 4\pi r^2,\ V = \frac{4}{3}\pi r^3 \quad | \quad \text{Hemisphere: } \text{CSA} = 2\pi r^2,\ \text{TSA} = 3\pi r^2,\ V = \frac{2}{3}\pi r^3 \end{aligned}

Symbol Definitions & SI Units

  • r, h, l: Radius, vertical height, and slant height (for cones)
  • a: Edge length of a cube (space diagonal = √3 a)

Worked Example

A cone of r = 3 cm and h = 4 cm has slant height l = √(3² + 4²) = 5 cm and CSA = π(3)(5) = 15π cm².

Common Mistake: Adding full TSAs when two solids are joined—joined circular faces become hidden inside, so sum only the visible CSAs.

Revision Tip: When melting and recasting a solid into another shape, total volume remains conserved.

Open Full Chapter: Surface Areas & Volumes →Print-Ready Web Sheet (PDF uploaded via Admin)
MathematicsGRADE 10intermediate
CBSE / ICSE / IGCSE / IB / UAE / USA / Singapore / Canada

Grouped Mean, Mode, Median & Empirical Relationship

Statistics
xˉ=a+(∑fiui∑fi)h,Mode=l+(f1−f02f1−f0−f2)h,Median=l+(N2−cff)h,3 Median=Mode+2 Mean\bar{x} = a + \left(\frac{\sum f_i u_i}{\sum f_i}\right)h, \quad \text{Mode} = l + \left(\frac{f_1 - f_0}{2f_1 - f_0 - f_2}\right)h, \quad \text{Median} = l + \left(\frac{\frac{N}{2} - cf}{f}\right)h, \quad 3\text{ Median} = \text{Mode} + 2\text{ Mean}

Symbol Definitions & SI Units

  • a, h: Assumed mean and uniform class interval width
  • l: Lower boundary of the modal or median class
  • f_1, f_0, f_2: Frequencies of modal, preceding, and succeeding classes
  • cf: Cumulative frequency of the class immediately preceding the median class

Worked Example

If Mean = 20 and Mode = 26, then 3 Median = 26 + 2(20) = 66 → Median = 22.

Common Mistake: Using the cumulative frequency of the median class itself instead of the preceding class for cf.

Revision Tip: Ensure class intervals are continuous (exclusive form) before reading l and h.

Open Full Chapter: Statistics →Print-Ready Web Sheet (PDF uploaded via Admin)
MathematicsGRADE 10foundation
CBSE / ICSE / IGCSE / IB / UAE / USA / Singapore / Canada

Classical Probability & Complementary Event Rule

Probability
P(E)=Number of favourable outcomesTotal possible outcomes,0≤P(E)≤1,P(Eˉ)=1−P(E)P(E) = \frac{\text{Number of favourable outcomes}}{\text{Total possible outcomes}}, \quad 0 \le P(E) \le 1, \quad P(\bar{E}) = 1 - P(E)

Symbol Definitions & SI Units

  • P(E): Probability of event E occurring
  • P(\bar{E}): Probability of event E not occurring (complement)

Worked Example

Drawing a non-ace card from a standard 52-card deck: P(Ace) = 4/52 = 1/13, so P(Not Ace) = 1 - 1/13 = 12/13.

Common Mistake: Giving a probability greater than 1 or negative—always verify 0 ≤ P(E) ≤ 1.

Revision Tip: Standard deck facts: 52 cards = 26 red + 26 black; 4 suits of 13 cards; 12 face cards (J, Q, K).

Open Full Chapter: Probability →Print-Ready Web Sheet (PDF uploaded via Admin)
MathematicsGRADE 12advanced
CBSE / ISC / IB DP / AP Calculus

Integration by Parts (ILATE Rule)

Integrals & Differential Equations
∫u dv=uv−∫v du\int u \, dv = u v - \int v \, du

Symbol Definitions & SI Units

  • u: First differentiable function chosen via ILATE priority
  • dv: Remaining integrable differential part

Worked Example

∫ x e^x dx: Let u = x (du = dx) and dv = e^x dx (v = e^x). Then ∫ x e^x dx = x e^x - ∫ e^x dx = e^x(x - 1) + C.

Common Mistake: Omitting the constant of integration + C for indefinite integrals or picking u in a way that complicates the remaining integral.

Revision Tip: Use ILATE (Inverse trig, Logarithmic, Algebraic, Trigonometric, Exponential) to select u cleanly.

Open Full Chapter: Integrals & Differential Equations →Print-Ready Web Sheet (PDF uploaded via Admin)
ChemistryGRADE 12advanced
CBSE / IB / A-Level / AP Chemistry

Arrhenius Equation

Chemical Kinetics & Equilibrium
k=Ae−Ea/(RT),ln⁡(k2k1)=EaR(1T1−1T2)k = A e^{-E_a / (R T)}, \quad \ln\left(\frac{k_2}{k_1}\right) = \frac{E_a}{R}\left(\frac{1}{T_1} - \frac{1}{T_2}\right)

Symbol Definitions & SI Units

  • k: Rate constant of the reaction
  • A: Frequency (pre-exponential) factor
  • E_a: Activation energy
  • R: Universal gas constant (8.314 J mol⁻¹ K⁻¹)
  • T: Absolute temperature in Kelvin

SI Units: E_a: J mol⁻¹ (or kJ mol⁻¹), T: Kelvin (K)

Worked Example

Convert temperatures to Kelvin (T = °C + 273.15) and ensure E_a is in J/mol to match R = 8.314 J mol⁻¹ K⁻¹.

Common Mistake: Plugging Celsius directly into T or mixing kJ/mol for E_a with J/(mol·K) for R.

Revision Tip: A plot of ln(k) versus 1/T yields a straight line with slope -E_a / R.

Open Full Chapter: Chemical Kinetics & Equilibrium →Print-Ready Web Sheet (PDF uploaded via Admin)
PhysicsGRADE 11intermediate
CBSE / IB / British / AP Physics

First Law of Thermodynamics

Laws of Thermodynamics
ΔQ=ΔU+ΔW,ΔW=∫V1V2P dV\Delta Q = \Delta U + \Delta W, \quad \Delta W = \int_{V_1}^{V_2} P \, dV

Symbol Definitions & SI Units

  • \Delta Q: Heat supplied to the system
  • \Delta U: Change in internal energy of the system
  • \Delta W: Work done by the system during expansion

SI Units: Joule (J)

Worked Example

If 500 J of heat is added to an ideal gas and it performs 200 J of expansion work, ΔU = 500 - 200 = +300 J.

Common Mistake: Confusing physics sign convention (W = work done BY the gas) with chemistry sign convention (w = work done ON the gas).

Revision Tip: For an isothermal process of an ideal gas, ΔU = 0 so ΔQ = ΔW; for an adiabatic process, ΔQ = 0 so ΔU = -ΔW.

Open Full Chapter: Laws of Thermodynamics →Print-Ready Web Sheet (PDF uploaded via Admin)